|
| |
Glaze Mixing Tables
The most useful, versatile and strongest
glaze tables in existence!
Each welded aluminum bin holds 100 pounds
or more, depending on the density of the material.
Bins simply lift out, but cannot fall out when
in use. Available with moisture-resistant MDF top with high-pressure melamine
overlay.
Another choice gives five bins on one side or five on each side for a
total of ten.
End wings (two, one or none) simply fold down against the legs when not
in use. They can be Bucket Wing (as shown, with hole for a standard
five-gallon plastic bucket) or Blank Wing (no hole). In the Bucket Wing,
an inset accepts a standard 15” plastic throwing bat (included) to close
the hole and yield a smooth, level top when a bucket is not being used.
Both wings measure 24” x 24” x ¾” and can support up
to 100 pounds each.
BIN SUPPORTS ARE GUARANTEED NEVER TO BEND, SAG OR DEFORM
UNDER LOAD. |
 |
| Each table includes one printed sheet of labels
for common glaze components
plus sheet of 15 blank labels.
Multiple tables can be locked together end-to-end with
no-charge spacer kits.
Made in USA. Full ten-year warranty.
Shipped fully assembled by motor freight within US
and Canada only. Undamaged delivery guaranteed by North Star.
|
Studio And Classroom Worktables
 |
These very strong worktables can support 600 pounds on each surface
for a total of 1,200 pounds. Here again versatility is North Star’s
hallmark. They can be ordered with or without the bottom shelf; they can
be ordered with one or two End Wings or, as shown here, without End
Wings. Several tables can be locked together in a line using no-cost
spacer kits.
End Wings, or “extensions” just fold down against the legs when not in
use; they can be smooth or have an opening to hold a five-gallon plastic
bucket. Please read the paragraph above on the GLAZE MIXING TABLE and
note that photo for more information about End Wings. Also note that if
two or more tables are locked together, only the extreme end tables can
accommodate one wing each.
Frame is 16-gauge American steel with baked-on powder coat finish far
tougher than any paint. Top and shelf made of ¾” MDF (no formaldehyde)
with a high-pressure melamine overlay. Overall dimensions as shown: 50”
long, 28” wide, 36” high. Made in USA. Ships UPS.
|
To view prices and order please
select the product from the drop down menu, located at the top of this page.
|
